Flashing K750i to W800 Tutorial

1. K750i --> W800i (Completed)

Ok. You want to flash your phone from K750i to a W800i. You are new and almost dont know anything about this. Here you will get a detailed tutorial about how to do that. Ok, lets start.

Requirments:
A DCU-60 - A standard cable, comes with phone
A K750i Recommend updating using SEUSXS++
A main file
A FS file

First a little about the main file: W800_R1BC002_MAIN_EU_EMEA_RED49.bin

W800_R1BC002_MAIN_EU_EMEA_RED49.bin

W800: The phone
R1BC002: Firmware Version
Main: Indicates that its the main firware
EU_EMEA: The operator
RED49: Color (Red) and lock number 49 CID49

And you need a FS file, i use this: W800_R1BC002_FS_EU3.fbn

Now, lets start flashing.
1. Open XS++
2. Press Start
3. You will get some instructions in the left panel
4. Hold "C" on your phone and connect.if you get "PORT STATUS: ACTIVE" And nothing happens, then unplug phone, remove battery, and insert again. Then try again.
5. Check "Flash Main Firmware"
6. Press the "..." Button, means browse. Find the main file W800_R1BC002_MAIN_EU_EMEA_RED49.bin and click open
7. Now press "Flash"
8. When its done, it will stuck on 291/291, when its on 291/291 then wait 5 seconds, and unplug phone. In XS++ press Close.
9. Now XS++ is closed. Just enter it again. In your phone: remove battery, insert again. Successfully plug your phone to XS++.
10. Now, instead of Checking "Flash main Firmware". Check "Flash File System", Browse the file W800_R1BC002_FS_EU3.fbn and select it, press open. (Means that only Flash File system is checked)
11. Press "Flash"
12. when its done just remove phone from data-cable, remove battery, reinsert. Enter XS++, attach phone.
13. Now you will have to check "Customize File System", use this:

Select Phone model:
W800
Select CDA and Region:
EUROPE_3 (CDA102425/17)

14. Press "Flash"
When its done, Unplug phone, remove battery, insert again. turn on Phone. And congratulations !! Now your phone is a W800i !!!! Enjoy ! Credz to me. Just want to say thanks to bombastic..